The Importance of an Energy Audit, Using Infrared Imaging

January 30th, 2014 by Contributor Leave a reply »
Thermal energy loss

Thermal energy loss

An energy audit could be the only thing between you, a safe home, and a full wallet.

Canadian buildings, according to the Canada Green Building Council, consume up to 38 per cent of all secondary energy use, which is energy obtained from primary energy sources. Residing in your home, you consume energy in many ways: cooking dinner on the stovetop; running water for your bath; refrigerating your leftovers; and, of course, heating your home.

You might turn the lights out before bed and take care not to waste water. Though this effort certainly helps conserve energy, consider the possibility of problems in your home that are nearly impossible to detect yourself; difficult to control; and ones that are ultimately preventing you from achieving an energy-efficient home.

Finding out if your home is energy-efficient

Consuming energy is inevitable and, in fact, necessary. However, we can be smarter about the ways in which we do so and we can make our homes more energy-efficient, which in turn will ensure they are safe and sound, warm and dry, and even help patch up that hole in your wallet.

First, you need to find out how your home is using energy. Taking a look around on the inside or outside of your property, you might spot the source of a leak or draft. In many cases though, the issue is more subtle and out of sight. The only completely reliable way to find out how your home is using (or losing) energy is by having a certified and experienced inspector visit and carry out a thorough energy audit.

Infrared imaging for your energy audit

An energy audit using infrared imaging is both an accurate and completely safe way to detect whereabouts you’re losing energy. However, an infrared inspection can be complex and is most reliable when a thermal imaging expert conducts the energy audit—surveying your home’s whole envelope and indoor environment—and properly interprets the results. This way, you’ll save time and, ultimately, money.

Carrying out an energy audit via infrared imaging allows the inspector to detect several major problems, including the following:

–          All moisture buildup

–          Leaking or burst pipes

–          All areas of water intrusion from outdoors in

–          All areas where there is indoor air escaping your home

How an infrared inspector detects your home’s energy conservation

A certified infrared inspector, using a high-resolution infrared camera, is able to detect any problem that may be preventing your home from maximising energy. The camera picks up the energy flow inside the house, reading where and how it’s being used. The inspector weighs the energy input against the output and is then able to tell the energy conservation of the home.

Depending on his or her results, the inspector will inform you of the ways you can improve energy efficiency, through repairs, renovations, upgrades or other lifestyle modifications. A sustainable energy environment, or green building, can be achieved, regardless of whether you’re in the building process or you’ve been living in your home for decades.

Choosing an energy-efficient home

An energy audit may not be in your budget. However, if your home has heat escaping or isn’t making the most of its energy, you should begin to assess the pros and cons at hand. A situation like this is not only costly itself, but it can be dangerous.

Often, the problems detected during the inspection are ones that must be fixed immediately. For instance, moisture buildup jeopardizes the structural integrity of your home and can lead to black mold growth within 24 to 48 hours.

When you own a home, you’ve committed yourself—your time, money and attention—to maintaining it. Be certain its energy consumption is neither costing you a fortune nor risking your comfort and safety.

 

Article written by Ivan Ward, Inspector at  Mold Busters– Infrared  inspection services from Ottawa.

Advertisement

1 comment

  1. Caryl Anne says:

    In my opinion, energy audits should be done regularly to protect you and your home from further issues and to help lower your costs. It’s definitely worth looking into. Thanks for sharing!

Leave a Reply

Get Adobe Flash player