Posts Tagged ‘radiant heat’

Baseboard radiators that look like baseboards

June 9th, 2014
The baseboard is a radiator!

The baseboard is a radiator!

 

I was contacted by Christine from BaseboardRads.com about their product which is a baseboard radiator.

You can create extra space in your home by converting old, iron radiators into these compact baseboard rads. They work with hydronic heating systems and come ready to install with connectors already in place. No welding or cutting is necessary.

Dimensions: They are 7 1/8″ high, 1 1/16″ thick and are available in various lengths. An eight foot baseboard rad will heat an average-sized room.

They are paintable, and you can find matching MDF baseboards anywhere baseboards are sold.

The rads are safer than electric baseboard heaters because there are no exposed elements. They are also more energy efficient.

Cost is $32/foot plus the cost of installation. Christine noted that they should be installed by a certified HVAC technician or plumber because they are part of a hydronic heating system.

The rads are manufactured in Pickering, Ontario.

For more information, visit their website: http://www.baseboardrads.com

 

Hydronic Radiant Heat is Beautiful Heat

February 6th, 2012

Installed hydronic radiant heating tubing. (Photo courtesy of Eileen Joy)

When I walk into a home with hydronic radiant heat on a freezing cold day I feel this warm sense of comfort as soon as I take my boots off and my sock feet touch the warmed floor. The warmth rising from beneath the floor warms my toes and spreads all the way up to my fingers and even to my ears. It is a clean, quiet heat that is also highly energy efficient. I haven’t written about radiant heat before for a few reasons: one is that I’ve heard that it is fairly expensive to install, another is that I’ve never been able to find out just how energy efficient it is versus other heating systems. However, when I was contacted by a program called Beautiful Heat, which is aims to spread the word about the benefits of radiant heat,  it gave me the push I needed to do some further investigation. I contacted a few contractors regarding my cost and efficiency questions and the results are below.

What is Hydronic Radiant Heat?: Water is heated in a boiler and then circulated through tubes laid out under flooring and/or walls, heating the floors or walls themselves and not the air. Radiant heating systems offer flexibility in heating as it can be installed very specifically. For instance, John Bell installed radiant heating tubes in front of his windows for about two feet to help moderate any cold coming through the windows in the winter. Radiant heat is a flexible heating system in that it can be limited to certain areas of the home such as mudrooms, washrooms, basements and the temperature can be regulated for each room. It can also be installed in conjunction with other heating systems (rads and/or forced air).

Radiant heat has several advantages over forced air systems. It warms the floor or walls instead of the air making rooms more comfortable to be in. It can be used with an already installed boiler system assuming the current boiler has excess capacity and building envelope changes have been taken into account. It’s a very quiet system. Duct work is only needed for other systems such as a central vac and an energy or heat recovery ventilator. These tubes are much smaller than a forced air system so no large forced air duct work is necessary. Regarding cooling system, a separate system is required, such as a mini-split ductless air conditioning system.

Because heat rises, it’s best to install a radiant heating system on the lowest level or level of the home. It works under any flooring option including wood and tile.

Installed tubing for radiant heat. (Photo courtesy of Eileen Joy)

Cost: According to John Mulder of Mulder Heating Ltd, in Coalhurst, Alberta, if you’re installing a radiant heat system, you should expect to pay about 3-4 times the price of a forced air system because, generally, boilers are more expensive than forced air systems. There is also the cost of laying of the tubes and sub-floor preparation such as a skim coat if the tubes are laid under concrete. It’s difficult to estimate a true cost of installing the system because it depends on so many factors from how well insulated the space is or will be to how many square feet the final install will be. If you’re doing a substantial renovation and insulating the basement floor, radiant heat is a great option for basement living spaces.

Again regarding cost, Rolf Baumann of RGB Group notes that most people don’t include water heating as part of their heating cost calculations but they should — and in the case of a boiler, it serves both functions. Rolf notes that generally separate hot water heaters’ efficiency actually dips from 66% efficiency to 50% after only three years of use and stays at that level for the rest of its working life, whereas that doesn’t happen with a boiler system.

Despite its price premium, radiant heat is one of the most popular heating systems in Europe. According to Rolf Baumann,

Radiant heating is used all over Europe  because it is an efficient system and economically less to run. The big difference is that a home in Europe is built to last 150-500 years with 3 generations of families living in them and 75 year mortgages. It does not matter that it costs 3-4 times as you are getting efficiency (less gas consumption to run it and gas is very expensive there) per year and you’re going to live there cradle to grave.

I would also add that because the cost of energy is so much more expensive in Europe versus North America, installing a boiler system that runs more efficiently than other options makes a lot of sense as the savings in the running costs could more than make up for the initial equipment investment in a much shorter time frame.

Energy Efficiency: One of the big questions that always comes up is the specific energy efficiency and savings from installing a radiant heat unit. John Mulder notes that

…radiant heat is more efficient but the number is intangible. Radiant heat is held in the materials of the home rather than the actual air, greatly reducing the heat loss through infiltration (air leakage) and ventilation. I`ve heard people say too, that warm feet make a warm body so with contact to warm materials, people have found that they can comfortably move their thermostat down several degrees.

 

The bottom line is, radiant heat is more energy efficient than most forced air units, more comfortable, quieter and it helps preserve indoor air quality. If you can take the long-term view regarding the cost of the installation it’s a very practical choice because running costs are lower than with other systems, and it can make previously unused spaces (the basement), more comfortable.

To find a hydronic radiant heat installer near you, visit the Beautiful Heat website, it provides a list of manufacturers, dealers and installers of hydronic radiant heat systems as well as more information about radiant heat and its benefits.

 

 

 

Jaga Radiators: beauty function and efficiency

March 6th, 2010

Heatwave Radiator by Jaga

One of the things I do on a regular basis is troll the internet for cool green products that you can get in Toronto. If I can’t buy them here, well then there’s that expression with the words “green” and “envy” in it…but I refuse to lower myself to something so cliché!

In any event, while reading one of my favourite blogs, Re-nest (now Apartment Therapy Green Living), I came across this totally cool radiator. No, it’s art! No, it’s a radiator! …It’s actually both.

This radiator is the “Heatwave” part of Jaga’s “Eye Catcher” Series. Form and function in one. Finally a radiator for which you don’t need a cover!

In addition to the Heatwave, Jaga makes a line of “Low H2O radiators” which function at least 10% more efficiently than your “old ironsides.”

If you have lived in a house with old iron radiators you’ll understand how uneven the heat they produce can be. If it’s a big room they tend to be burning hot and are unresponsive to abrupt temperature changes.  Part of the problem is the thermal mass of the iron. It heats up and cools down slowly because it’s so big and heavy. Another issue is the amount and temperature of the water the old rads need to use for heating.

Knock On Wood Low H2O Radiator by Jaga

Strada Low H2O Radiator by Jaga

Advantages of Low H2O radiators:

  • The low H2O radiator has a small mass with a low water input. This means it can respond very quickly to temperature changes.
  • It’s thin so it takes up less space (The Strada 10 model measures less than 5″ in depth).
  • On average these units can cut a heating bill by 10% based on using identical water temperatures as a traditional panel radiator would use. Further, your overall heating bill could be even lower if low H2O radiators are used throughout the house.
  • These radiators work by convection as opposed to radiant heat, which accounts for its efficiency and even heat throughout the room.
  • A Dynamic Boost Effect (DBE) fan can be added to any unit. It uses minimal electricity, makes almost no sound but can increase the radiator’s efficiency by up to 200% and often more. (Note, the DBE cost will double the radiator cost, however, because output is so much more it’s possible that smaller and fewer units will be needed.
  • Ideal for use with condensing boilers, or paired with radiant in-floor heating and geo-thermal systems.
  • Can be mixed in with traditional systems, however a temperature adjustment valve must be added to each old (cast iron) radiator. Approximate cost: $100 per valve.

Pricing:

Heatwave:

Small:             Height: 21″                     Length: 30″                              Price: $2,627.50 Cdn
Medium:       Height: 28″                     Length: 57″                              Price:  $4028.00 Cdn
Large:             Height: 40″                    Length: 82″                              Price: $8,759.50 Cdn

Strada wall mounted cabinet :  Type 10 Height: 19.5″     Length: 39.5″     Price:  $427.50 Cdn (comes in a variety of colours)
Tempo wall mounted cabinet:  Type 10 Height: 12″        Length: 39.5″     Price:  $326.00 Cdn (available in black or white)
Knockonwood wall mounted:   Type 10 Height: 12″        Length: 39,5″     Price:  $1,177.00 Cdn (available in several different wood finishes)

Note: prices are for radiator only. Installation and plumbing adjustment costs are not included. Check with Dealer for exact details. To locate distributors in other areas, click here.

Toronto Distributor:

Mech Tech MKTG Inc.
996 A Bathurst Street
Toronto, Ontario M5R 3G7

Phil Lewis
Tel.: 416-597-8663
Fax: 866-296-6771
mail@mechtech.ca
www.mechtech.ca

For complete information on Jaga radiators, visit Jaga Canada.

::via Re-nest.

Get Adobe Flash player